Our Clear Flat Glass is manufactured through mixing high-quality sand, natural ores and chemical materials at high temperature. The molten glass flows into tin bath where the float glass is spread, polished and formed on the molten tin. The float glass has smooth surface, excellent optical performance, stable chemical capability and high mechanism intensity.

It is also resistant to acid, alkali and corrosion. High quality clear float glass is important prototype in the line of glass further processing. It has great permeability an pureness, and it's used widely in off-line coating film, coating mirror, hot melting and other decorative glass processing.

The forming process of clear flat glass production is completed in a tin bath filled with protective gases (N2 and H2). Molten glass flows continuously from the tank furnace and floats on the surface of the relatively dense tin liquid. Under the action of gravity and surface tension, the glass liquid spreads and flattens on the tin liquid surface, forming a smooth upper and lower surface. After hardening and cooling, it is led up to the transition roller platform. The rollers on the roller table rotate, pulling the glass ribbon out of the tin bath and into the annealing kiln.

After annealing and cutting, float glass products are obtained. Compared with other forming methods, float glass has the advantages of being suitable for high-efficiency manufacturing of high-quality flat glass, such as no wave ribs, uniform thickness, flat upper and lower surfaces, and parallel to each other; The scale of the production line is not limited by the forming method, and the energy consumption per unit product is low; High utilization rate of finished products; Easy to manage scientifically and achieve full line mechanization and automation, with high labor productivity; The continuous operation cycle can last for several years, which is conducive to stable production; Suitable conditions can be provided for online production of some new varieties, such as electric float reflective glass, spray coated glass during annealing, cold end surface treatment, etc

• High light transmittance, excellent optical performance.
• Smooth and flat surface, visible flaw is controlled strictly.
• Easy to be cut, insulated, tempered and coated.
• Thickness available from 1.2mm to 19mm.
• We give each customer personalized, professional, and dedicated service.
• Energy saving through good heat absorption which reduces the transmission of solar heat radiation

http://www.aohongglass.com/